Introduction to Burner heating furnace multi chamber type, introduction to Forging furnace function advantages and characteristics

Burner heating furnace multi chamber typeIt is an efficient, energy-saving and environment-friendly metal heating device.，is a popular Burner heating furnace multi chamber type。The following is to introduce the Burner heating furnace multi chamber type:

1、Brief introduction of Burner heating furnace multi chamber type

Burner heating furnace multi chamber typeIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a common Burner heating furnace multi chamber type，Widely used inMetal forging heating,Improve production efficiency,Metal tempering,Metal melting and casting,Metal forging heating and so on。

Burner heating furnace multi chamber type

2、Burner heating furnace multi chamber type real beat

The panoramic shooting of One-combustion energy saving Burner heating furnace multi chamber type is shown as follows.。

Burner heating furnace multi chamber type

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural advantages of Burner heating furnace multi chamber type

The Burner heating furnace multi chamber type has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Radiation chamber

The heat load of the main place for Burner heating furnace multi chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. Radiation chamber

The heat load of the main place for Burner heating furnace multi chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Burner heating furnace multi chamber type

4、Functional advantages of Burner heating furnace multi chamber type

Burner heating furnace multi chamber types have the following advantages.

1. Intelligent control

The Burner heating furnace multi chamber type is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Improve product quality

Because the Burner heating furnace multi chamber type can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Wide application range

The Burner heating furnace multi chamber type is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Efficient combustion

The Burner heating furnace multi chamber type adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Rapid temperature rise

The Burner heating furnace multi chamber type can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Burner heating furnace multi chamber type

5、Burner heating furnace multi chamber type application

Burner heating furnace multi chamber types have the following purposes.

1. Improve production efficiency

The Burner heating furnace multi chamber type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Burner heating furnace multi chamber types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Burner heating furnace multi chamber type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Burner heating furnace multi chamber type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Burner heating furnace multi chamber types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Burner heating furnace multi chamber type

6、Burner heating furnace multi chamber type HD real shot

Speak directly with facts on the spot。

Burner heating furnace multi chamber type

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a forging heating device using gas as fuel.。

Burner heating furnace multi chamber typein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，The overall structural design is simple, diverse and beautiful.，structure mainly includes: convection chamber, furnace chamber, combustor, Radiation chamber, recovery of waste heat and so on，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。