What is a Automatic controlled greenhouse furnace? How much is the price of the forging furnace?

Automatic controlled greenhouse furnaceIt is a forging heating device using gas as fuel.，it is an ideal choice for customers to buy Automatic controlled greenhouse furnace。

1、Brief introduction of Automatic controlled greenhouse furnace

Automatic controlled greenhouse furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，It has the functions of Improve production efficiency, Metal heat treatment, Improve production efficiency, Metal tempering and Metal heat treatment，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，was developed and designed by One-combustion energy saving。

Automatic controlled greenhouse furnace

2、Structural characteristics of Automatic controlled greenhouse furnace

The Automatic controlled greenhouse furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Automatic controlled greenhouse furnace

3、Automatic controlled greenhouse furnace use

The purpose of Automatic controlled greenhouse furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Automatic controlled greenhouse furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Automatic controlled greenhouse furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Automatic controlled greenhouse furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Automatic controlled greenhouse furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Automatic controlled greenhouse furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Automatic controlled greenhouse furnace

4、Automatic controlled greenhouse furnace HD picture real shot

One-combustion energy saving Automatic controlled greenhouse furnace, product manufacturer, product features, is the ideal choice for new and old customers.。

Automatic controlled greenhouse furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Automatic controlled greenhouse furnace characteristics

The Automatic controlled greenhouse furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Automatic controlled greenhouse furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Strong adaptability

The Automatic controlled greenhouse furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Automatic controlled greenhouse furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Automatic controlled greenhouse furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Automatic controlled greenhouse furnace

Automatic controlled greenhouse furnaceit is mainly composed of convection chamber, ventilation system, combustor, ventilation system and Radiation chamber，features include Strong adaptability, Easy to maintain, energy saving and environmental protection, Easy to control and Stable and reliable。