What is a Regenerative burner tube annealing furnace? Introduction to the Working Principle of forging furnace

Regenerative burner tube annealing furnaceIt is a forging heating device using gas as fuel.，Simple structure and reliable operation.，it is mainly composed of recovery of waste heat, ventilation system, combustor, ventilation system and convection chamber，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，the main features are Easy to control, Strong adaptability, Stable and reliable, energy saving and environmental protection and energy-efficient，support customization。The following is to introduce the Regenerative burner tube annealing furnace:

1、Brief introduction of Regenerative burner tube annealing furnace

Regenerative burner tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of temper, quench, hardening and tempering, Forging heating and heat treatment，it is widely used in heat treatment, building materials, war industry, automobile and electron，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main features are Easy to maintain, Easy to control, energy-efficient, Easy to maintain and Strong adaptability。

Regenerative burner tube annealing furnace

2、Regenerative burner tube annealing furnace characteristics

The Regenerative burner tube annealing furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Regenerative burner tube annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Regenerative burner tube annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Regenerative burner tube annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Regenerative burner tube annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Regenerative burner tube annealing furnace

3、Regenerative burner tube annealing furnace function

Regenerative burner tube annealing furnacemultifunctional, with functions such as anneal, normalizing, Casting heating, temper and Casting heating。

Regenerative burner tube annealing furnace

4、Regenerative burner tube annealing furnace HD real picture

One-combustion energy saving Regenerative burner tube annealing furnace manufacturers, a variety of series of Regenerative burner tube annealing furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Regenerative burner tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Regenerative burner tube annealing furnace use

The purpose of Regenerative burner tube annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Regenerative burner tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Regenerative burner tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Regenerative burner tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative burner tube annealing furnace

6、Regenerative burner tube annealing furnace price advantage

The Regenerative burner tube annealing furnace price is introduced as follows:

1. Manufacturer scale

Our factory is a direct selling manufacturer of Regenerative burner tube annealing furnace, with independent production and processing facilities, few circulation links and low circulation cost.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Regenerative burner tube annealing furnace price and service can meet the actual needs of customers.

3. Manufacturer's strength

The nature of the manufacturer can also greatly affect the price of the Regenerative burner tube annealing furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

4. Different regions

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving located in Jinan., where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

5. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Regenerative burner tube annealing furnace

Regenerative burner tube annealing furnacefeatures include energy saving and environmental protection, Stable and reliable, Stable and reliable, Easy to control and Easy to maintain，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。