What is a Double pass mold shell roasting furnace? Introduction to the advantages and characteristics of the heating furnace

Double pass mold shell roasting furnaceIt is a forging heating device using gas as fuel.，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Double pass mold shell roasting furnace:

1、Brief introduction of Double pass mold shell roasting furnace

Double pass mold shell roasting furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，energy-efficient,Strong adaptability,Easy to maintain,Easy to control,Stable and reliable。

Double pass mold shell roasting furnace

2、Double pass mold shell roasting furnace function

Double pass mold shell roasting furnaceit has the functions of Casting heating, temper, Forging heating, temper and hardening and tempering，is a popular Double pass mold shell roasting furnace，Mainly used forEnergy conservation and environmental protection,Improve production efficiency,Energy conservation and environmental protection,Metal melting and casting andMetal tempering。

Double pass mold shell roasting furnace

3、Double pass mold shell roasting furnace advantage

The advantages of Double pass mold shell roasting furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Wide application range

The Double pass mold shell roasting furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Rapid temperature rise

The Double pass mold shell roasting furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Extend the service life of equipment

The Double pass mold shell roasting furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Rapid temperature rise

The Double pass mold shell roasting furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Double pass mold shell roasting furnace

4、Working principle of Double pass mold shell roasting furnace

Double pass mold shell roasting furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Double pass mold shell roasting furnace

5、Double pass mold shell roasting furnace video

The following is the live video of Double pass mold shell roasting furnace designed and produced by One-combustion energy saving for users, from which we can see the Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs. of One-combustion energy savingProduction and processing的Double pass mold shell roasting furnace.。

Double pass mold shell roasting furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd widely used inelectron,war industry,petroleum,heat treatment,aerospace and other industries。

6、Double pass mold shell roasting furnace quotation

The Double pass mold shell roasting furnace price is introduced as follows:

1. quality

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Double pass mold shell roasting furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

2. Configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Double pass mold shell roasting furnace price is affected by the configuration, and the price varies.

3. company strength

The nature of the manufacturer can also greatly affect the price of the Double pass mold shell roasting furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

4. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Double pass mold shell roasting furnace

Double pass mold shell roasting furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is mostly used in Metal forging heating, Metal tempering, Metal forging heating, Metal heat treatment, Improve production efficiency, Metal melting and casting and so on，is a kind of high quality and low price Double pass mold shell roasting furnace。