What is a Regenerative burner through furnace? Forging furnace specifications, models, and parameters

Regenerative burner through furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is widely used in aerospace, metallurgy, pharmacy, Household necessities, heat treatment and other industries，is a Regenerative burner through furnace，Commonly used inEnergy conservation and environmental protection,Metal melting and casting,Metal melting and casting,Improve production efficiency,Energy conservation and environmental protection and so on，can be customized according to user's needs.。

1、Brief introduction of Regenerative burner through furnace

Regenerative burner through furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Regenerative burner through furnace

2、Video analysis of Regenerative burner through furnace

Speak directly with facts on the spot。

Regenerative burner through furnace

As you can see from the live video.，One-combustion energy saving it is widely used in shipping, material, chemical industry, surface treatment and automobile。

3、Introduction of advantages of Regenerative burner through furnace

The advantages of Regenerative burner through furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Efficient combustion

The Regenerative burner through furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Regenerative burner through furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Uniform heating

The Regenerative burner through furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Wide application range

The Regenerative burner through furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Regenerative burner through furnace

4、Regenerative burner through furnace structure

The Regenerative burner through furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Regenerative burner through furnace

5、Introduction of Regenerative burner through furnace characteristics

Regenerative burner through furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Regenerative burner through furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to maintain

The structural design of the Regenerative burner through furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Regenerative burner through furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Regenerative burner through furnace

Regenerative burner through furnaceit is mainly composed of combustor, furnace chamber, Radiation chamber, recovery of waste heat and ventilation system，This Regenerative burner through furnaceThe overall structural design is relatively simple and compact.，It is a forging heating device using gas as fuel.。