What is a Energy saving through forging furnace? Introduction to the advantages and characteristics of the heating furnace

Energy saving through forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of Easy to maintain, energy-efficient, energy saving and environmental protection, Stable and reliable and Strong adaptability，the product looks beautiful.，it has the structure of Radiation chamber, recovery of waste heat, furnace chamber, ventilation system and combustor，This productThe structural design is more advanced and reasonable.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of Energy saving through forging furnace

Energy saving through forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，usually used in surface treatment, chemical industry, Household necessities, metallurgy, shipping and other fields，it has the functions of anneal, heat treatment, Forging heating, temper and quench，is carefully developed by One-combustion energy saving combined with advanced technology。

Energy saving through forging furnace

2、Introduction of Energy saving through forging furnace characteristics

Energy saving through forging furnace has the following characteristics

1. Stable and reliable

The Energy saving through forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Energy saving through forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Energy saving through forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Efficient heating

The Energy saving through forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Energy saving through forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Energy saving through forging furnace

3、Introduction of advantages of Energy saving through forging furnace

Energy saving through forging furnaces have the following advantages.

1. Multiple fuel options

Although the Energy saving through forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Energy saving through forging furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Improve product quality

Because the Energy saving through forging furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Energy saving through forging furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Rapid temperature rise

The Energy saving through forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Energy saving through forging furnace

4、Energy saving through forging furnace application

The purpose of Energy saving through forging furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Energy saving through forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Energy saving through forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Energy saving through forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Energy saving through forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Energy saving through forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Energy saving through forging furnace

5、Energy saving through forging furnace video live broadcast

Speak directly with facts on the spot。

Energy saving through forging furnace

As you can see from the live video.，One-combustion energy saving at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

6、How much is the Energy saving through forging furnace?

The Energy saving through forging furnace price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. geographical position

One-combustion energy saving address:Jinan, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. product configuration

The difference in Energy saving through forging furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Energy saving through forging furnace price and service can meet the actual needs of customers.

Energy saving through forging furnace

Energy saving through forging furnaceit mainly includes convection chamber, ventilation system, Radiation chamber, ventilation system and ventilation system，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，multifunctional, with functions such as hardening and tempering, anneal, Forging heating, quench and heat treatment。