Introduction to Car preheating furnace, Forging furnace specifications, model parameters

Car preheating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Car preheating furnace

Car preheating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，is a common Car preheating furnace，Easy to control,energy-efficient,energy saving and environmental protection,Easy to control,Strong adaptability，is carefully developed by One-combustion energy saving combined with advanced technology。

Car preheating furnace

2、Car preheating furnace characteristics

The Car preheating furnace features are as follows:

1. Efficient heating

The Car preheating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Car preheating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Car preheating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Car preheating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Car preheating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Car preheating furnace

3、Car preheating furnace performance advantage

Car preheating furnaces have the following advantages.

1. Wide application range

The Car preheating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Intelligent control

The Car preheating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The Car preheating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Rapid temperature rise

The Car preheating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Improve product quality

Because the Car preheating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Car preheating furnace

4、Physical picture of Car preheating furnace

Take a look at the high-definition drawings of Car preheating furnace with excellent quality for our customers' reference.。

Car preheating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Car preheating furnace video live broadcast

Speak directly with facts on the spot。

Car preheating furnace

As you can see from the live video.，One-combustion energy saving the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

6、Car preheating furnace price

The Car preheating furnace price is introduced as follows:

1. manufacturing cost

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

2. Manufacturer scale

One-combustion energy saving is a self-produced and self-sold Car preheating furnace, and has rich experience in the production and manufacturing of Car preheating furnace. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

3. mass discrepancy

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

4. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. market factors

Market change is one of the factors that affect the price range greatly. Market change is unstable, but there are certain rules to follow. Market change is caused by other factors, such as economic instability, competition among manufacturers and too big difference between supply and demand. These factors are the core reasons that cause the market to fluctuate greatly, and then it will have a bad impact on prices.

Car preheating furnace

Car preheating furnaceIt is a forging heating device using gas as fuel.，widely used in petroleum, metallurgy, building materials, electron, light industry and other fields。