What is a Car thermal storage heating furnace? Introduction to the principle of Forging furnace structure

Car thermal storage heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，is a Car thermal storage heating furnace newly developed by One-combustion energy saving。The following is to introduce the Car thermal storage heating furnace:

1、Brief introduction of Car thermal storage heating furnace

Car thermal storage heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as normalizing, Forging heating, heat treatment, quench and temper，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，is a kind of high quality and low price Car thermal storage heating furnace。

Car thermal storage heating furnace

2、Car thermal storage heating furnace function

Car thermal storage heating furnaceit has the functions of Forging heating, heat treatment, anneal, Casting heating and normalizing，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，it mainly includes recovery of waste heat, furnace chamber, Radiation chamber, combustor and ventilation system，Car thermal storage heating furnaceSimple structure and advanced technology.，Widely used in Metal heat treatment, Metal tempering, Metal melting and casting, Energy conservation and environmental protection and Improve production efficiency。

Car thermal storage heating furnace

3、Car thermal storage heating furnace explanation video

On-site aerial photography of Car thermal storage heating furnace。

Car thermal storage heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a common Car thermal storage heating furnace。

4、Working principle of Car thermal storage heating furnace

Car thermal storage heating furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It has a wide range of uses, including Metal forging heating, Metal heat treatment, Metal melting and casting, Metal tempering and Energy conservation and environmental protection，multifunctional, with functions such as hardening and tempering, temper, normalizing, anneal and hardening and tempering，It is a forging heating device using gas as fuel.，be loved by our customers.。

Car thermal storage heating furnace

5、Car thermal storage heating furnace application

Car thermal storage heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Car thermal storage heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Car thermal storage heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Car thermal storage heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Car thermal storage heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Car thermal storage heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Car thermal storage heating furnace

6、Company selection

Choosing a suitable Car thermal storage heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Car thermal storage heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Car thermal storage heating furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the main structure includes Radiation chamber, ventilation system, combustor, ventilation system, convection chamber and so on，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。