Introduction to Trolley type annealing furnace and Forging furnace working principle

Trolley type annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，it is widely used inautomobile,material,shipping,Household necessities,machinery and other industries。The following is to introduce the Trolley type annealing furnace:

1、Brief introduction of Trolley type annealing furnace

Trolley type annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of hardening and tempering, Casting heating, anneal, temper and quench，It can be used for Metal heat treatment, Metal tempering, Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal forging heating and so on，the product looks atmospheric.，is a Trolley type annealing furnace。

Trolley type annealing furnace

2、Advantages of Trolley type annealing furnace principle

Trolley type annealing furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，favorable price。

Trolley type annealing furnace

3、Trolley type annealing furnace characteristics

The Trolley type annealing furnace features are as follows:

1. Efficient heating

The Trolley type annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Easy to control

The combustion system and ventilation system of the Trolley type annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Trolley type annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Efficient heating

The Trolley type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Trolley type annealing furnace

4、Trolley type annealing furnace advantage

The advantages of Trolley type annealing furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Improve product quality

Because the Trolley type annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Multiple fuel options

Although the Trolley type annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Efficient combustion

The Trolley type annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Trolley type annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

Trolley type annealing furnace

5、Trolley type annealing furnace video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Trolley type annealing furnace production process and production site, and gain favorable comments and recognition from customers.。

Trolley type annealing furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as normalizing, heat treatment, Forging heating, hardening and tempering and anneal。

6、Trolley type annealing furnace price consultation

The Trolley type annealing furnace price is introduced as follows:

1. Manufacturer's sales model

If there is no middleman to earn the difference, then the Trolley type annealing furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

2. Different regions

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Trolley type annealing furnace.

3. market demand

In order to build their own brands, some manufacturers deliberately reduce the price of Trolley type annealing furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Trolley type annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Trolley type annealing furnace price can meet the purchasing needs of customers.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Trolley type annealing furnace

Trolley type annealing furnaceis a kind of high quality and low price Trolley type annealing furnace，the product looks beautiful.，it is widely used in building materials, pharmacy, war industry, heat treatment, metallurgy and other industries。