What is a Mold trolley forging furnace? Introduction to the advantages and characteristics of the forging furnace

Mold trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，be loved by our customers.。

1、Brief introduction of Mold trolley forging furnace

Mold trolley forging furnaceIt is a forging heating device using gas as fuel.，is a Mold trolley forging furnace，it has the functions of Forging heating, heat treatment, quench, hardening and tempering and Casting heating，it can be used in aerospace, metallurgy, material, heat treatment, chemical industry and other industries，Cheap and high quality。

Mold trolley forging furnace

2、Mold trolley forging furnace function

Mold trolley forging furnacemultifunctional, with functions such as anneal, normalizing, temper, Forging heating and temper，the product looks beautiful.。

Mold trolley forging furnace

3、Working principle of Mold trolley forging furnace

Mold trolley forging furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Mold trolley forging furnace

4、Mold trolley forging furnace characteristics

The Mold trolley forging furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Mold trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Mold trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Mold trolley forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Efficient heating

The Mold trolley forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Mold trolley forging furnace

5、Mold trolley forging furnace use

The purpose of Mold trolley forging furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Mold trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Mold trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Mold trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Mold trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Mold trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Mold trolley forging furnace

Mold trolley forging furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is widely used inpharmacy,building materials,automobile,light industry,Household necessities and other industries。