What is a Forging trolley furnace? Introduction to the advantages and characteristics of the Forging furnace

Forging trolley furnaceIt is a forging heating device using gas as fuel.，It is a product series that integrates Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Metal tempering and Metal forging heating，it is an ideal choice for customers to buy Forging trolley furnace。The following is to introduce the Forging trolley furnace:

1、Brief introduction of Forging trolley furnace

Forging trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is usually composed of recovery of waste heat, combustor, recovery of waste heat, ventilation system and combustor。

Forging trolley furnace

2、Advantages of Forging trolley furnace principle

Forging trolley furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a kind of high quality and low price Forging trolley furnace，the main features are Easy to maintain, energy saving and environmental protection, Strong adaptability, Stable and reliable and energy saving and environmental protection，It can be used for Improve production efficiency, Metal melting and casting, Metal melting and casting, Metal tempering, Metal heat treatment, Metal forging heating and so on，has been favored by more and more customers.。

Forging trolley furnace

3、Forging trolley furnace customer scene picture

Various specifications and models of Forging trolley furnace are displayed for our customers to visit.。

Forging trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural characteristics of Forging trolley furnace

The Forging trolley furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Radiation chamber

The heat load of the main place for Forging trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Forging trolley furnace

5、Forging trolley furnace use

The purpose of Forging trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Forging trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Forging trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Forging trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Forging trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Forging trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Forging trolley furnace

6、How much is the Forging trolley furnace?

The Forging trolley furnace price is introduced as follows:

1. Model specification

There are various specifications and models of Forging trolley furnace, and the performance of different specifications and models is quite different. Customers should choose products with appropriate specifications and models according to the actual situation.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Forging trolley furnace price and service can meet the actual needs of customers.

3. cost of production

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Forging trolley furnace will also fluctuate to some extent.

4. Configuration difference

Usually, the quotation of Forging trolley furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

5. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

Forging trolley furnace

Forging trolley furnaceThe overall structural design is simple, diverse and beautiful.，it is mainly composed of ventilation system, convection chamber, Radiation chamber, furnace chamber and recovery of waste heat，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It has the functions of Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment, Metal tempering and Metal forging heating。