Introduction to Annealing gas trolley furnace, how much is the price of the forging furnace?

Annealing gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a kind of Annealing gas trolley furnace manufactured by One-combustion energy saving。

1、Brief introduction of Annealing gas trolley furnace

Annealing gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks atmospheric.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Annealing gas trolley furnace

2、Annealing gas trolley furnace advantage

The advantages of Annealing gas trolley furnace are as follows:

1. Intelligent control

The Annealing gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Extend the service life of equipment

The Annealing gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Efficient combustion

The Annealing gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Multiple fuel options

Although the Annealing gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Annealing gas trolley furnace

3、Annealing gas trolley furnace application

Annealing gas trolley furnaces have the following purposes.

1. Improve production efficiency

The Annealing gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Annealing gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Annealing gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Annealing gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Annealing gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Annealing gas trolley furnace

4、Structural characteristics of Annealing gas trolley furnace

The Annealing gas trolley furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Annealing gas trolley furnace

5、Annealing gas trolley furnace function

Annealing gas trolley furnacemultifunctional, with functions such as heat treatment, quench, Forging heating, normalizing and temper，It is a forging heating device using gas as fuel.，the product looks beautiful.。

Annealing gas trolley furnace

6、Brief introduction of Annealing gas trolley furnace

Annealing gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of hardening and tempering, Casting heating, anneal, heat treatment and hardening and tempering。

Annealing gas trolley furnace

Annealing gas trolley furnaceStrong adaptability,energy saving and environmental protection,Easy to maintain,Strong adaptability,Stable and reliable，It has a wide range of uses, and is often used inMetal melting and casting,Metal heat treatment,Improve production efficiency,Metal forging heating,Metal tempering and so on。