What is a Heat treatment trolley furnace? Introduction to the advantages and characteristics of Forging furnace functions

Heat treatment trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Heat treatment trolley furnace:

1、Brief introduction of Heat treatment trolley furnace

Heat treatment trolley furnaceIt is a forging heating device using gas as fuel.，be loved by our customers.。

Heat treatment trolley furnace

2、Heat treatment trolley furnace application

Heat treatment trolley furnaces have the following purposes.

1. Energy conservation and environmental protection

The Heat treatment trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Heat treatment trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Heat treatment trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Heat treatment trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Heat treatment trolley furnace

3、Heat treatment trolley furnace performance advantage

The advantages of Heat treatment trolley furnace are as follows:

1. easy to operate

The operation interface of the Heat treatment trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Rapid temperature rise

The Heat treatment trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Wide application range

The Heat treatment trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Uniform heating

The Heat treatment trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Heat treatment trolley furnace

4、Heat treatment trolley furnace working site

Speak directly with facts on the spot。

Heat treatment trolley furnace

As you can see from the live video.，One-combustion energy saving the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

5、Heat treatment trolley furnace characteristics

The Heat treatment trolley furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The Heat treatment trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to maintain

The structural design of the Heat treatment trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Heat treatment trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Stable and reliable

The Heat treatment trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Heat treatment trolley furnace

6、Heat treatment trolley furnace quotation

The Heat treatment trolley furnace price is introduced as follows:

1. quality factor

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

2. product model

There are several specifications and models of Heat treatment trolley furnace, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Heat treatment trolley furnace, and the budget and other requirements recommend suitable Heat treatment trolley furnace for everyone.

3. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. cost of production

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

5. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Heat treatment trolley furnace

Heat treatment trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular Heat treatment trolley furnace，usually used in heat treatment, electron, pharmacy, metallurgy, automobile and other fields。