What is a Automated trolley furnace? Introduction to the advantages and characteristics of the Forging furnace

Automated trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The structure is novel, special, advanced, reasonable and scientific.，it mainly includes recovery of waste heat, convection chamber, ventilation system, convection chamber and furnace chamber，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，customizable。

1、Brief introduction of Automated trolley furnace

Automated trolley furnaceIt is a forging heating device using gas as fuel.，it has been widely used in heat treatment, war industry, building materials, material, petroleum and other industries。

Automated trolley furnace

2、Automated trolley furnace principle

Automated trolley furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Cheap and high quality。

Automated trolley furnace

3、Automated trolley furnace use

The purpose of Automated trolley furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Automated trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Automated trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Automated trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Automated trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Automated trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Automated trolley furnace

4、Automated trolley furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Automated trolley furnace production process and production site, and gain favorable comments and recognition from customers.。

Automated trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

5、Introduction of Automated trolley furnace characteristics

Automated trolley furnace has the following characteristics

1. Strong adaptability

The Automated trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Automated trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Automated trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Automated trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Automated trolley furnace

6、One-combustion energy saving delivery site

You can buy Automated trolley furnace according to your needs and show you product videos.。

Automated trolley furnace

As you can see from the live video.One-combustion energy saving the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。

Automated trolley furnacemultifunctional, with functions such as heat treatment, temper, Forging heating, hardening and tempering and temper，It can be used for Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency, Energy conservation and environmental protection and so on。