What is a Double door and double car trolley heating furnace? heating furnace specifications, models, and parameters

Double door and double car trolley heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，widely used in pharmacy, electron, building materials, heat treatment, surface treatment and other fields，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，multifunctional, with functions such as Casting heating, anneal, temper, Forging heating and normalizing，features include energy saving and environmental protection, Easy to control, Strong adaptability, Stable and reliable and Easy to maintain。

1、Brief introduction of Double door and double car trolley heating furnace

Double door and double car trolley heating furnaceIt is a forging heating device using gas as fuel.，is designed by One-combustion energy saving with advanced technology。

Double door and double car trolley heating furnace

2、Double door and double car trolley heating furnace advantage

The advantages of Double door and double car trolley heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Double door and double car trolley heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Intelligent control

The Double door and double car trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Improve product quality

Because the Double door and double car trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Extend the service life of equipment

The Double door and double car trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Double door and double car trolley heating furnace

3、Introduction of Double door and double car trolley heating furnace characteristics

Double door and double car trolley heating furnace has the following characteristics

1. Strong adaptability

The Double door and double car trolley heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Stable and reliable

The Double door and double car trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Double door and double car trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to maintain

The structural design of the Double door and double car trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Double door and double car trolley heating furnace

4、Advantages of Double door and double car trolley heating furnace principle

Double door and double car trolley heating furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is an efficient, energy-saving and environment-friendly metal heating device.，widely used inMachinery manufacturing,shipping,automobile,metallurgy,petroleum and other industries，is a Double door and double car trolley heating furnace，has been favored by more and more customers.。

Double door and double car trolley heating furnace

5、Double door and double car trolley heating furnace application

Double door and double car trolley heating furnaces have the following purposes.

1. Improve production efficiency

The Double door and double car trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door and double car trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Double door and double car trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Double door and double car trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Double door and double car trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Double door and double car trolley heating furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving, as one of the professional and powerful Double door and double car trolley heating furnace manufacturers in Jinan, Shandong province, produces Double door and double car trolley heating furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Double door and double car trolley heating furnacethe product looks atmospheric.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。