What is a Double door annealing gas trolley furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Double door annealing gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in Household necessities, pharmacy, metallurgy, petroleum, Machinery manufacturing and other industries，it is an ideal choice for customers to buy Double door annealing gas trolley furnace。

1、Brief introduction of Double door annealing gas trolley furnace

Double door annealing gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Double door annealing gas trolley furnace

2、Double door annealing gas trolley furnace function

Double door annealing gas trolley furnaceit has the functions of heat treatment, quench, temper, Forging heating and anneal，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，Simple structure and advanced technology.，structure mainly includes: furnace chamber, ventilation system, recovery of waste heat, Radiation chamber, combustor and so on。

Double door annealing gas trolley furnace

3、Introduction of Double door annealing gas trolley furnace characteristics

Double door annealing gas trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Double door annealing gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Double door annealing gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Double door annealing gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Double door annealing gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Double door annealing gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Double door annealing gas trolley furnace

4、Double door annealing gas trolley furnace use

The purpose of Double door annealing gas trolley furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door annealing gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Double door annealing gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Double door annealing gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Double door annealing gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Double door annealing gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Double door annealing gas trolley furnace

5、Double door annealing gas trolley furnace price advantage

The Double door annealing gas trolley furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Double door annealing gas trolley furnace has a higher cost performance.

3. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. quality factor

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Double door annealing gas trolley furnace have more or less differences in price.

Double door annealing gas trolley furnace

6、One-combustion energy saving workshop picture real shot

The finished products of the Double door annealing gas trolley furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Double door annealing gas trolley furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Double door annealing gas trolley furnaceUsing regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，multifunctional, with functions such as normalizing, Casting heating, hardening and tempering, heat treatment and Casting heating，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。