What is a Metal heat treatment trolley heating furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Metal heat treatment trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，support customization。

1、Brief introduction of Metal heat treatment trolley heating furnace

Metal heat treatment trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used inautomobile,chemical industry,war industry,machinery,electron and other industries，is designed by One-combustion energy saving with advanced technology。

Metal heat treatment trolley heating furnace

2、Metal heat treatment trolley heating furnace application

Metal heat treatment trolley heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Metal heat treatment trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Metal heat treatment trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Metal heat treatment trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Metal heat treatment trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Metal heat treatment trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Metal heat treatment trolley heating furnace

3、Advantages of Metal heat treatment trolley heating furnace principle

Metal heat treatment trolley heating furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，The overall structural design is simple, diverse and beautiful.，generally, it is composed of ventilation system, combustor, convection chamber, recovery of waste heat, ventilation system and other major components，Widely used inMetal forging heating,Metal heat treatment,Improve production efficiency,Metal forging heating,Energy conservation and environmental protection and so on，the main features are energy-efficient, Easy to control, Easy to maintain, Strong adaptability and Easy to control，it is an ideal choice for customers to buy Metal heat treatment trolley heating furnace。

Metal heat treatment trolley heating furnace

4、Introduction of advantages of Metal heat treatment trolley heating furnace

Metal heat treatment trolley heating furnaces have the following advantages.

1. Uniform heating

The Metal heat treatment trolley heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. easy to operate

The operation interface of the Metal heat treatment trolley heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Wide application range

The Metal heat treatment trolley heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Intelligent control

The Metal heat treatment trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Efficient combustion

The Metal heat treatment trolley heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Metal heat treatment trolley heating furnace

5、Metal heat treatment trolley heating furnace structure composition

The Metal heat treatment trolley heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Metal heat treatment trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Metal heat treatment trolley heating furnace

6、One-combustion energy saving company discount

Metal heat treatment trolley heating furnace is a new type of heating furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for material and other industries. Now consult Metal heat treatment trolley heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Metal heat treatment trolley heating furnacethe advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。