What is a Two end high-temperature trolley forging furnace? Introduction to the advantages and characteristics of forging furnace functions

Two end high-temperature trolley forging furnaceIt is a forging heating device using gas as fuel.，It can be used for Energy conservation and environmental protection, Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment, Improve production efficiency and so on，is an advanced Two end high-temperature trolley forging furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Two end high-temperature trolley forging furnace

Two end high-temperature trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is mainly composed of ventilation system, ventilation system, furnace chamber, combustor and ventilation system，This productThe overall structural design is simple and novel.，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Two end high-temperature trolley forging furnace

2、Two end high-temperature trolley forging furnace customer scene picture

Two end high-temperature trolley forging furnace specifications and models, novel design, beautiful appearance, for our customers to visit.。

Two end high-temperature trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural characteristics of Two end high-temperature trolley forging furnace

The Two end high-temperature trolley forging furnace has the following structure

1. Radiation chamber

The heat load of the main place for Two end high-temperature trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Two end high-temperature trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Two end high-temperature trolley forging furnace

4、Two end high-temperature trolley forging furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Two end high-temperature trolley forging furnace production process and production site, and gain favorable comments and recognition from customers.。

Two end high-temperature trolley forging furnace

As you can see from the live video.，One-combustion energy saving It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

5、Advantages of Two end high-temperature trolley forging furnace principle

Two end high-temperature trolley forging furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is mainly composed of convection chamber, recovery of waste heat, Radiation chamber, Radiation chamber and ventilation system，super quality and competitive price。

Two end high-temperature trolley forging furnace

6、High-definition picture display of One-combustion energy saving workshop

The finished products of the Two end high-temperature trolley forging furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Two end high-temperature trolley forging furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Two end high-temperature trolley forging furnacemultifunctional, with functions such as Casting heating, Forging heating, hardening and tempering, anneal and heat treatment，it has been widely used in war industry, light industry, chemical industry, heat treatment, war industry and other industries。