Introduction to Full fiber high-temperature trolley heating furnace, heating furnace specifications, model parameters

Full fiber high-temperature trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of Forging heating, Casting heating, quench, temper and heat treatment，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Full fiber high-temperature trolley heating furnace newly developed by One-combustion energy saving。The following is to introduce the Full fiber high-temperature trolley heating furnace:

1、Brief introduction of Full fiber high-temperature trolley heating furnace

Full fiber high-temperature trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The structural design is simple, novel and special.，it is usually composed of combustor, convection chamber, recovery of waste heat, Radiation chamber and furnace chamber，it can be used in automobile, war industry, surface treatment, material, Household necessities and other industries，the product looks beautiful.，features include Easy to control, Easy to maintain, Stable and reliable, energy saving and environmental protection and energy-efficient。

Full fiber high-temperature trolley heating furnace

2、Functional advantages of Full fiber high-temperature trolley heating furnace

The advantages of Full fiber high-temperature trolley heating furnace are as follows:

1. Intelligent control

The Full fiber high-temperature trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Improve product quality

Because the Full fiber high-temperature trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Efficient combustion

The Full fiber high-temperature trolley heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Multiple fuel options

Although the Full fiber high-temperature trolley heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Full fiber high-temperature trolley heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Full fiber high-temperature trolley heating furnace

3、Video analysis of Full fiber high-temperature trolley heating furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Full fiber high-temperature trolley heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the characteristics of Easy to maintain, energy-efficient, Strong adaptability, Stable and reliable and energy saving and environmental protection。

4、Introduction of Full fiber high-temperature trolley heating furnace characteristics

Full fiber high-temperature trolley heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Full fiber high-temperature trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Full fiber high-temperature trolley heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Full fiber high-temperature trolley heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Full fiber high-temperature trolley heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Full fiber high-temperature trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Full fiber high-temperature trolley heating furnace

5、Full fiber high-temperature trolley heating furnace function

Full fiber high-temperature trolley heating furnacemultifunctional, with functions such as anneal, hardening and tempering, heat treatment, anneal and quench，the main structure includes ventilation system, combustor, furnace chamber, recovery of waste heat, Radiation chamber and so on，Full fiber high-temperature trolley heating furnaceThe overall structural design is simple and novel.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Full fiber high-temperature trolley heating furnace

6、How much is the Full fiber high-temperature trolley heating furnace?

The Full fiber high-temperature trolley heating furnace price is introduced as follows:

1. mass discrepancy

The Full fiber high-temperature trolley heating furnace is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Full fiber high-temperature trolley heating furnace and won the trust of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. deploy

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Full fiber high-temperature trolley heating furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Full fiber high-temperature trolley heating furnace is reasonable for products with the same configuration.

4. product model

One-combustion energy saving Full fiber high-temperature trolley heating furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving Sell products at lower prices, so that every customer can enjoy preferential prices

5. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Full fiber high-temperature trolley heating furnace

Full fiber high-temperature trolley heating furnaceit has the functions of Casting heating, temper, normalizing, Forging heating and hardening and tempering，the main features are Strong adaptability, Stable and reliable, energy saving and environmental protection, Easy to control and Strong adaptability，is a popular Full fiber high-temperature trolley heating furnace。