Introduction to Walking beam industrial furnace and heating furnace working principle

Walking beam industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it mainly includes ventilation system, recovery of waste heat, combustor, ventilation system and recovery of waste heat，it has the functions of anneal, hardening and tempering, temper, normalizing and heat treatment。The following is to introduce the Walking beam industrial furnace:

1、Brief introduction of Walking beam industrial furnace

Walking beam industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Walking beam industrial furnace

2、Walking beam industrial furnace customer scene picture

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Walking beam industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural characteristics of Walking beam industrial furnace

The Walking beam industrial furnace has the following structure

1. Radiation chamber

The heat load of the main place for Walking beam industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Walking beam industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Walking beam industrial furnace

4、Walking beam industrial furnace principle

Walking beam industrial furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a kind of Walking beam industrial furnace manufactured by One-combustion energy saving。

Walking beam industrial furnace

5、Walking beam industrial furnace use

The purpose of Walking beam industrial furnace is introduced as follows:

1. Energy conservation and environmental protection

The Walking beam industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Walking beam industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Walking beam industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Walking beam industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Walking beam industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Walking beam industrial furnace

6、Video analysis of Walking beam industrial furnace

On-site aerial photography of Walking beam industrial furnace。

Walking beam industrial furnace

As you can see from the live video.，One-combustion energy saving It has the functions of Improve production efficiency, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection and Metal heat treatment。

Walking beam industrial furnacethe main structure includes ventilation system, Radiation chamber, convection chamber, furnace chamber and combustor，This productSimple structure and advanced technology.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。