What is a Stepped beam continuous heat treatment furnace? heating furnace specifications, models, and parameters

Stepped beam continuous heat treatment furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a common Stepped beam continuous heat treatment furnace，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it has the functions of heat treatment, hardening and tempering, normalizing, anneal and temper。The following is to introduce the Stepped beam continuous heat treatment furnace:

1、Brief introduction of Stepped beam continuous heat treatment furnace

Stepped beam continuous heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Stepped beam continuous heat treatment furnace，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The structural design is more advanced and reasonable.，the main structure includes furnace chamber, furnace chamber, convection chamber, ventilation system, ventilation system and so on，can be customized according to user's needs.。

Stepped beam continuous heat treatment furnace

2、Stepped beam continuous heat treatment furnace function

Stepped beam continuous heat treatment furnacemultifunctional, with functions such as quench, Forging heating, Casting heating, Casting heating and heat treatment，the main features are Easy to maintain, energy-efficient, energy saving and environmental protection, Easy to maintain and Stable and reliable，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，be loved by our customers.。

Stepped beam continuous heat treatment furnace

3、Stepped beam continuous heat treatment furnace application

Stepped beam continuous heat treatment furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Stepped beam continuous heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Stepped beam continuous heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Stepped beam continuous heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Stepped beam continuous heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Stepped beam continuous heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Stepped beam continuous heat treatment furnace

4、Stepped beam continuous heat treatment furnace field real shot

Speak directly with facts on the spot。

Stepped beam continuous heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It has a wide range of uses, and is often used inMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal tempering,Metal heat treatment and so on。

5、Introduction of Stepped beam continuous heat treatment furnace characteristics

Stepped beam continuous heat treatment furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stepped beam continuous heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Stepped beam continuous heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Stepped beam continuous heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stepped beam continuous heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Stable and reliable

The Stepped beam continuous heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Stepped beam continuous heat treatment furnace

6、How much is the Stepped beam continuous heat treatment furnace?

The Stepped beam continuous heat treatment furnace price is introduced as follows:

1. Reasonable cost

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Stepped beam continuous heat treatment furnace will also be reduced.

2. Manufacturer scale

There are many manufacturers of products in Jinan, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Stepped beam continuous heat treatment furnace is naturally different.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. type of operation

One-combustion energy saving Stepped beam continuous heat treatment furnace manufacturer is a manufacturer specializing in the production of different products, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Stepped beam continuous heat treatment furnace price is also low.

Stepped beam continuous heat treatment furnace

Stepped beam continuous heat treatment furnacethe main structure includes Radiation chamber, recovery of waste heat, combustor, combustor, ventilation system and so on，This Stepped beam continuous heat treatment furnaceThe structure is novel, special, advanced, reasonable and scientific.，it has the characteristics of Strong adaptability, Easy to control, Strong adaptability, Stable and reliable and energy saving and environmental protection，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。