Introduction to Walking beam pipeline heating furnace, introduction to Forging furnace advantages and characteristics

Walking beam pipeline heating furnaceIt is a forging heating device using gas as fuel.，has been favored by more and more customers.。

1、Brief introduction of Walking beam pipeline heating furnace

Walking beam pipeline heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Walking beam pipeline heating furnace，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，support customization。

Walking beam pipeline heating furnace

2、Walking beam pipeline heating furnace performance advantage

The advantages of Walking beam pipeline heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Walking beam pipeline heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Extend the service life of equipment

The Walking beam pipeline heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Multiple fuel options

Although the Walking beam pipeline heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. easy to operate

The operation interface of the Walking beam pipeline heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Improve product quality

Because the Walking beam pipeline heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Walking beam pipeline heating furnace

3、Walking beam pipeline heating furnace working site

You can buy Walking beam pipeline heating furnace according to your needs and show you Walking beam pipeline heating furnace videos.。

Walking beam pipeline heating furnace

As you can see from the live video.，One-combustion energy saving It has the functions of Metal tempering, Metal tempering, Metal heat treatment, Metal forging heating and Improve production efficiency。

4、Walking beam pipeline heating furnace use

The purpose of Walking beam pipeline heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Walking beam pipeline heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Walking beam pipeline heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Walking beam pipeline heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Walking beam pipeline heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Walking beam pipeline heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Walking beam pipeline heating furnace

5、Introduction of Walking beam pipeline heating furnace characteristics

Walking beam pipeline heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Walking beam pipeline heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Walking beam pipeline heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Walking beam pipeline heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Walking beam pipeline heating furnace

6、Structural characteristics of Walking beam pipeline heating furnace

The Walking beam pipeline heating furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Walking beam pipeline heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Walking beam pipeline heating furnace

Walking beam pipeline heating furnacethe product looks atmospheric.，it is widely used in aerospace, material, electron, Household necessities, war industry and other industries。