Introduction to Regenerative natural gas walking industrial furnace, introduction to Forging furnace advantages and characteristics

Regenerative natural gas walking industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It has the functions of Energy conservation and environmental protection, Metal tempering, Metal forging heating, Improve production efficiency and Metal melting and casting，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

1、Brief introduction of Regenerative natural gas walking industrial furnace

Regenerative natural gas walking industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，multifunctional, with functions such as temper, heat treatment, hardening and tempering, quench and Forging heating，customizable。

Regenerative natural gas walking industrial furnace

2、Introduction of Regenerative natural gas walking industrial furnace characteristics

Regenerative natural gas walking industrial furnace has the following characteristics

1. Stable and reliable

The Regenerative natural gas walking industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative natural gas walking industrial furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Regenerative natural gas walking industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Efficient heating

The Regenerative natural gas walking industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Regenerative natural gas walking industrial furnace

3、Advantages of Regenerative natural gas walking industrial furnace principle

Regenerative natural gas walking industrial furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，is carefully developed by One-combustion energy saving combined with advanced technology。

Regenerative natural gas walking industrial furnace

4、Regenerative natural gas walking industrial furnace structure composition

The Regenerative natural gas walking industrial furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative natural gas walking industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. furnace chamber

A space for holding metallic materials for heating.

Regenerative natural gas walking industrial furnace

5、Regenerative natural gas walking industrial furnace video live broadcast

You can buy Regenerative natural gas walking industrial furnace according to your needs and show you product videos.。

Regenerative natural gas walking industrial furnace

As you can see from the live video.，One-combustion energy saving It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Regenerative natural gas walking industrial furnaceIt can be used for Metal melting and casting, Improve production efficiency, Metal heat treatment, Metal forging heating, Energy conservation and environmental protection, Metal tempering and so on，Easy to maintain,energy saving and environmental protection,Easy to control,Stable and reliable,Easy to maintain。