What is a Plate chain continuous annealing furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Plate chain continuous annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，it is mainly composed of convection chamber, ventilation system, ventilation system, combustor and furnace chamber，the main structure includes recovery of waste heat, recovery of waste heat, furnace chamber, ventilation system, convection chamber and so on，Plate chain continuous annealing furnaceThe structural design is simple, novel and special.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

1、Brief introduction of Plate chain continuous annealing furnace

Plate chain continuous annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a popular Plate chain continuous annealing furnace，the product looks atmospheric.，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal heat treatment,Improve production efficiency,Metal melting and casting,Energy conservation and environmental protection and so on，support customization。

Plate chain continuous annealing furnace

2、Plate chain continuous annealing furnace advantage

The advantages of Plate chain continuous annealing furnace are as follows:

1. Improve product quality

Because the Plate chain continuous annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. easy to operate

The operation interface of the Plate chain continuous annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Wide application range

The Plate chain continuous annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Plate chain continuous annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Plate chain continuous annealing furnace

3、Plate chain continuous annealing furnace video live broadcast

Speak directly with facts on the spot。

Plate chain continuous annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It can be used for Metal tempering, Metal forging heating, Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal melting and casting and so on。

4、Plate chain continuous annealing furnace structure

The Plate chain continuous annealing furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Plate chain continuous annealing furnace

5、Plate chain continuous annealing furnace HD real picture

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Plate chain continuous annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Plate chain continuous annealing furnace price

The Plate chain continuous annealing furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Different regions

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

3. Brand strength

At present, there are various brands of Plate chain continuous annealing furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Plate chain continuous annealing furnace are different.

4. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

5. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

Plate chain continuous annealing furnace

Plate chain continuous annealing furnacethe advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，usually used in material, aerospace, building materials, shipping, automobile and other fields。