Introduction to Steel chain industrial furnace and heating furnace structure principle

Steel chain industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is usually composed of convection chamber, ventilation system, furnace chamber, ventilation system and furnace chamber，It has the functions of Metal tempering, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment and Metal forging heating。The following is to introduce the Steel chain industrial furnace:

1、Brief introduction of Steel chain industrial furnace

Steel chain industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.，energy-efficient,energy saving and environmental protection,energy-efficient,Easy to maintain,Easy to control，it has the functions of anneal, hardening and tempering, Casting heating, Forging heating and quench，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

Steel chain industrial furnace

2、Steel chain industrial furnace structure composition

The Steel chain industrial furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Radiation chamber

The heat load of the main place for Steel chain industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Steel chain industrial furnace

3、Steel chain industrial furnace video detail

You can buy Steel chain industrial furnace according to your needs and show you product videos.。

Steel chain industrial furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as heat treatment, temper, normalizing, Casting heating and heat treatment。

4、Steel chain industrial furnace application

Steel chain industrial furnaces have the following purposes.

1. Improve production efficiency

The Steel chain industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Steel chain industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Steel chain industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Steel chain industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Steel chain industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Steel chain industrial furnace

5、Steel chain industrial furnace principle

Steel chain industrial furnacethe principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，multifunctional, with functions such as anneal, quench, Forging heating, hardening and tempering and temper，the product looks atmospheric.。

Steel chain industrial furnace

6、One-combustion energy saving's strength

The company has many years of Steel chain industrial furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Steel chain industrial furnacethe product looks beautiful.，The overall structural design is simple, diverse and beautiful.，the main structure includes combustor, convection chamber, Radiation chamber, ventilation system, recovery of waste heat and so on，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。