What is a Gas storage heat treatment chain furnace? Introduction to the principle of Forging furnace structure

Gas storage heat treatment chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is mainly composed of Radiation chamber, recovery of waste heat, combustor, furnace chamber and ventilation system，This Gas storage heat treatment chain furnaceThe overall structural design is simple, diverse and beautiful.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，is developed and improved by One-combustion energy saving。

1、Brief introduction of Gas storage heat treatment chain furnace

Gas storage heat treatment chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，support customization。

Gas storage heat treatment chain furnace

2、Structural advantages of Gas storage heat treatment chain furnace

The Gas storage heat treatment chain furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Gas storage heat treatment chain furnace

3、Gas storage heat treatment chain furnace function

Gas storage heat treatment chain furnacemultifunctional, with functions such as anneal, heat treatment, quench, Forging heating and Casting heating，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，usually used in machinery, Machinery manufacturing, automobile, heat treatment, metallurgy and other fields，generally, it is composed of ventilation system, ventilation system, convection chamber, Radiation chamber, combustor and other major components，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

Gas storage heat treatment chain furnace

4、Gas storage heat treatment chain furnace customer scene picture

High-definition pictures of Gas storage heat treatment chain furnace of different specifications and models,the product looks beautiful., reliable in quality and trustworthy.。

Gas storage heat treatment chain furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Gas storage heat treatment chain furnace use

The purpose of Gas storage heat treatment chain furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Gas storage heat treatment chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Gas storage heat treatment chain furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Gas storage heat treatment chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Gas storage heat treatment chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Gas storage heat treatment chain furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Gas storage heat treatment chain furnace

Gas storage heat treatment chain furnaceit has the characteristics of energy saving and environmental protection, Stable and reliable, Easy to control, Strong adaptability and Stable and reliable，the product looks beautiful.。