Introduction to Natural gas regenerative heat treatment chain furnace, heating furnace advantages, characteristics and principles

Natural gas regenerative heat treatment chain furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main structure includes combustor, ventilation system, recovery of waste heat, ventilation system and combustor，Natural gas regenerative heat treatment chain furnaceThe structure is novel, special, advanced, reasonable and scientific.，It can be used for Energy conservation and environmental protection, Metal heat treatment, Improve production efficiency, Metal melting and casting, Metal forging heating, Improve production efficiency and so on，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，widely used inchemical industry,light industry,machinery,pharmacy,surface treatment and other industries。The following is to introduce the Natural gas regenerative heat treatment chain furnace:

1、Brief introduction of Natural gas regenerative heat treatment chain furnace

Natural gas regenerative heat treatment chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，was developed and designed by One-combustion energy saving。

Natural gas regenerative heat treatment chain furnace

2、Natural gas regenerative heat treatment chain furnace function

Natural gas regenerative heat treatment chain furnaceit has the functions of Forging heating, quench, heat treatment, temper and normalizing，is a Natural gas regenerative heat treatment chain furnace，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has been widely used in building materials, Household necessities, war industry, metallurgy, surface treatment and other industries，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Natural gas regenerative heat treatment chain furnace

3、Natural gas regenerative heat treatment chain furnace use

The purpose of Natural gas regenerative heat treatment chain furnace is introduced as follows:

1. Metal forging heating

The Natural gas regenerative heat treatment chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Natural gas regenerative heat treatment chain furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Natural gas regenerative heat treatment chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Natural gas regenerative heat treatment chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Natural gas regenerative heat treatment chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Natural gas regenerative heat treatment chain furnace

4、Structural advantages of Natural gas regenerative heat treatment chain furnace

The Natural gas regenerative heat treatment chain furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Natural gas regenerative heat treatment chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Natural gas regenerative heat treatment chain furnace

5、Natural gas regenerative heat treatment chain furnace field real shot

Speak directly with facts on the spot。

Natural gas regenerative heat treatment chain furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as Casting heating, quench, heat treatment, anneal and hardening and tempering。

6、Natural gas regenerative heat treatment chain furnace function

Natural gas regenerative heat treatment chain furnaceit has the functions of Forging heating, temper, hardening and tempering, quench and Casting heating，It is mostly used in Energy conservation and environmental protection, Metal heat treatment, Metal tempering, Metal melting and casting, Metal forging heating, Metal heat treatment and so on，The structural design is simple, novel and special.，the main structure includes combustor, convection chamber, ventilation system, Radiation chamber, ventilation system and so on，it is an ideal choice for customers to buy Natural gas regenerative heat treatment chain furnace。

Natural gas regenerative heat treatment chain furnace

Natural gas regenerative heat treatment chain furnacethe main structure includes convection chamber, ventilation system, furnace chamber, Radiation chamber and recovery of waste heat，This Natural gas regenerative heat treatment chain furnaceThe structural design is more advanced and reasonable.，it has the characteristics of Stable and reliable, Easy to control, Stable and reliable, energy-efficient and Easy to control，the product looks beautiful.。