Introduction to Energy saving chain annealing furnace, introduction to Forging furnace advantages and characteristics

Energy saving chain annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，has been favored by more and more customers.。The following is to introduce the Energy saving chain annealing furnace:

1、Brief introduction of Energy saving chain annealing furnace

Energy saving chain annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the main structure includes convection chamber, combustor, Radiation chamber, recovery of waste heat, furnace chamber and so on，is a common Energy saving chain annealing furnace，it is widely used in Machinery manufacturing, machinery, building materials, automobile, machinery and other industries，support customization。

Energy saving chain annealing furnace

2、Energy saving chain annealing furnace use

The purpose of Energy saving chain annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Energy saving chain annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Energy saving chain annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Energy saving chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Energy saving chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Energy saving chain annealing furnace

3、Structural advantages of Energy saving chain annealing furnace

The Energy saving chain annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Radiation chamber

The heat load of the main place for Energy saving chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Energy saving chain annealing furnace

4、Energy saving chain annealing furnace HD real shot

Speak directly with facts on the spot。

Energy saving chain annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Mainly used forImprove production efficiency,Energy conservation and environmental protection,Metal heat treatment,Improve production efficiency andEnergy conservation and environmental protection。

5、Energy saving chain annealing furnace function

Energy saving chain annealing furnacemultifunctional, with functions such as Casting heating, anneal, heat treatment, hardening and tempering and Forging heating。

Energy saving chain annealing furnace

6、Introduction of Energy saving chain annealing furnace characteristics

Energy saving chain annealing furnace has the following characteristics

1. Efficient heating

The Energy saving chain annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Energy saving chain annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Energy saving chain annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Energy saving chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Energy saving chain annealing furnace

Energy saving chain annealing furnaceit has the functions of quench, normalizing, hardening and tempering, anneal and Casting heating，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it can be used in material, heat treatment, petroleum, Household necessities, shipping and other industries。