Introduction to Stick type heat treatment heating furnace and Forging furnace advantages and features

Stick type heat treatment heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，usually used in Household necessities, light industry, electron, war industry, aerospace and other fields，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of ventilation system, furnace chamber, convection chamber, furnace chamber and Radiation chamber，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has been widely used in machinery, shipping, petroleum, automobile, material and other industries。The following is to introduce the Stick type heat treatment heating furnace:

1、Brief introduction of Stick type heat treatment heating furnace

Stick type heat treatment heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It is a product series that integrates Metal tempering, Metal heat treatment, Metal melting and casting, Metal forging heating and Energy conservation and environmental protection，multifunctional, with functions such as hardening and tempering, normalizing, quench, anneal and normalizing，the product looks beautiful.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

Stick type heat treatment heating furnace

2、Structural advantages of Stick type heat treatment heating furnace

The Stick type heat treatment heating furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Stick type heat treatment heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Stick type heat treatment heating furnace

3、Functional advantages of Stick type heat treatment heating furnace

Stick type heat treatment heating furnaces have the following advantages.

1. Efficient combustion

The Stick type heat treatment heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stick type heat treatment heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Extend the service life of equipment

The Stick type heat treatment heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Rapid temperature rise

The Stick type heat treatment heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Improve product quality

Because the Stick type heat treatment heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Stick type heat treatment heating furnace

4、Stick type heat treatment heating furnace application

Stick type heat treatment heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick type heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Stick type heat treatment heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Stick type heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Stick type heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Stick type heat treatment heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Stick type heat treatment heating furnace

5、Stick type heat treatment heating furnace real beat

High-definition pictures of various types of Stick type heat treatment heating furnace are displayed for customers who are about to buy. Please submit a telephone appointment for physical inspection.。

Stick type heat treatment heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Stick type heat treatment heating furnace function

Stick type heat treatment heating furnaceit has the functions of anneal, hardening and tempering, Forging heating, temper and heat treatment，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Stick type heat treatment heating furnace，The price is low and affordable，be of high quality。

Stick type heat treatment heating furnace

Stick type heat treatment heating furnacemultifunctional, with functions such as Casting heating, quench, heat treatment, quench and normalizing，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。