What is a Continuous roller quenching heat treatment furnace? Introduction to the advantages and characteristics of the forging furnace

Continuous roller quenching heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，the main structure includes convection chamber, ventilation system, recovery of waste heat, ventilation system and furnace chamber，This Continuous roller quenching heat treatment furnaceThe overall structural design is simple and novel.，is a Continuous roller quenching heat treatment furnace，is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Continuous roller quenching heat treatment furnace

Continuous roller quenching heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.。

Continuous roller quenching heat treatment furnace

2、Continuous roller quenching heat treatment furnace application

Continuous roller quenching heat treatment furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous roller quenching heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Continuous roller quenching heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Continuous roller quenching heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Continuous roller quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Continuous roller quenching heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Continuous roller quenching heat treatment furnace

3、Continuous roller quenching heat treatment furnace principle

Continuous roller quenching heat treatment furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as normalizing, hardening and tempering, Forging heating, normalizing and hardening and tempering，It is an efficient, energy-saving and environment-friendly metal heating device.。

Continuous roller quenching heat treatment furnace

4、Introduction of Continuous roller quenching heat treatment furnace characteristics

Continuous roller quenching heat treatment furnace has the following characteristics

1. Efficient heating

The Continuous roller quenching heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Continuous roller quenching heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Continuous roller quenching heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Continuous roller quenching heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

The combustion system and ventilation system of the Continuous roller quenching heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Continuous roller quenching heat treatment furnace

5、Functional advantages of Continuous roller quenching heat treatment furnace

The advantages of Continuous roller quenching heat treatment furnace are as follows:

1. Uniform heating

The Continuous roller quenching heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Extend the service life of equipment

The Continuous roller quenching heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Wide application range

The Continuous roller quenching heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Improve product quality

Because the Continuous roller quenching heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Wide application range

The Continuous roller quenching heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Continuous roller quenching heat treatment furnace

6、One-combustion energy saving workshop real shot

Speak directly with facts on the spot。

Continuous roller quenching heat treatment furnace

As you can see from the live video.One-combustion energy saving is a popular Continuous roller quenching heat treatment furnace。

Continuous roller quenching heat treatment furnacethe product looks atmospheric.，it can be used in chemical industry, electron, surface treatment, building materials, Household necessities and other industries。