Introduction to Automatic temperature regulating roller furnace, how much is the price of the forging furnace?

Automatic temperature regulating roller furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Widely used in Metal forging heating, Metal melting and casting, Metal tempering, Metal heat treatment and Energy conservation and environmental protection，it is an ideal choice for customers to buy Automatic temperature regulating roller furnace。The following is to introduce the Automatic temperature regulating roller furnace:

1、Brief introduction of Automatic temperature regulating roller furnace

Automatic temperature regulating roller furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，multifunctional, with functions such as quench, normalizing, heat treatment, hardening and tempering and anneal。

Automatic temperature regulating roller furnace

2、Automatic temperature regulating roller furnace application

Automatic temperature regulating roller furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature regulating roller furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature regulating roller furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Automatic temperature regulating roller furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Automatic temperature regulating roller furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Automatic temperature regulating roller furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Automatic temperature regulating roller furnace

3、Automatic temperature regulating roller furnace picture

The following pictures can be used for reference by new and old customers.。

Automatic temperature regulating roller furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Automatic temperature regulating roller furnace structure

The Automatic temperature regulating roller furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Radiation chamber

The heat load of the main place for Automatic temperature regulating roller furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Automatic temperature regulating roller furnace

5、Introduction of Automatic temperature regulating roller furnace characteristics

Automatic temperature regulating roller furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Efficient heating

The Automatic temperature regulating roller furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to maintain

The structural design of the Automatic temperature regulating roller furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Stable and reliable

The Automatic temperature regulating roller furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Automatic temperature regulating roller furnace

Automatic temperature regulating roller furnacethe product looks atmospheric.，it is widely used in metallurgy, Machinery manufacturing, aerospace, heat treatment, Machinery manufacturing and other industries，is a popular Automatic temperature regulating roller furnace。