What is a Environmentally friendly roller bottom furnace? How much is the price of the Forging furnace?

Environmentally friendly roller bottom furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is widely used inchemical industry,war industry,pharmacy,Household necessities,shipping and other industries，the product looks beautiful.，Widely used inImprove production efficiency,Metal tempering,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection and so on。The following is to introduce the Environmentally friendly roller bottom furnace:

1、Brief introduction of Environmentally friendly roller bottom furnace

Environmentally friendly roller bottom furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of high quality and low price Environmentally friendly roller bottom furnace。

Environmentally friendly roller bottom furnace

2、Environmentally friendly roller bottom furnace function

Environmentally friendly roller bottom furnaceit has the functions of Forging heating, heat treatment, quench, hardening and tempering and anneal。

Environmentally friendly roller bottom furnace

3、Environmentally friendly roller bottom furnace real shot picture

The panoramic shooting of One-combustion energy saving Environmentally friendly roller bottom furnace is shown as follows.。

Environmentally friendly roller bottom furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Environmentally friendly roller bottom furnace characteristics

The Environmentally friendly roller bottom furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Environmentally friendly roller bottom furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Environmentally friendly roller bottom furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Environmentally friendly roller bottom furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Environmentally friendly roller bottom furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Efficient heating

The Environmentally friendly roller bottom furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Environmentally friendly roller bottom furnace

5、Environmentally friendly roller bottom furnace application

Environmentally friendly roller bottom furnaces have the following purposes.

1. Energy conservation and environmental protection

The Environmentally friendly roller bottom furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Environmentally friendly roller bottom furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Environmentally friendly roller bottom furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal tempering

By properly heating and cooling the metal material, the Environmentally friendly roller bottom furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Environmentally friendly roller bottom furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Environmentally friendly roller bottom furnace

Environmentally friendly roller bottom furnacemultifunctional, with functions such as temper, quench, Casting heating, Forging heating and normalizing，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。