Introduction to Pit type heat treatment furnace and heating furnace structure principle

Pit type heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Structure consists of combustor, Radiation chamber, recovery of waste heat, ventilation system, ventilation system and so on，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Pit type heat treatment furnace:

1、Brief introduction of Pit type heat treatment furnace

Pit type heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Pit type heat treatment furnace。

Pit type heat treatment furnace

2、Pit type heat treatment furnace principle

Pit type heat treatment furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Pit type heat treatment furnace

3、Pit type heat treatment furnace performance advantage

The advantages of Pit type heat treatment furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Pit type heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Improve product quality

Because the Pit type heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. easy to operate

The operation interface of the Pit type heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Efficient combustion

The Pit type heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Pit type heat treatment furnace

4、Pit type heat treatment furnace function

Pit type heat treatment furnacemultifunctional, with functions such as heat treatment, Forging heating, quench, Casting heating and normalizing。

Pit type heat treatment furnace

5、Pit type heat treatment furnace use

The purpose of Pit type heat treatment furnace is introduced as follows:

1. Metal forging heating

The Pit type heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Pit type heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Pit type heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Pit type heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Pit type heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Pit type heat treatment furnace

6、How much is the Pit type heat treatment furnace?

The Pit type heat treatment furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province has convenient transportation, which provides a good convenience for the transportation of Pit type heat treatment furnace.

3. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pit type heat treatment furnace price and service can meet the actual needs of customers.

4. Configuration level

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Pit type heat treatment furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Pit type heat treatment furnace is reasonable for products with the same configuration.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Pit type heat treatment furnace

Pit type heat treatment furnaceit has the functions of anneal, hardening and tempering, Forging heating, quench and temper，is a common Pit type heat treatment furnace，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。