Introduction to Tempered multi well heating furnace and Forging furnace advantages and features

Tempered multi well heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，energy saving and environmental protection,Strong adaptability,energy saving and environmental protection,Stable and reliable,Easy to control，structure mainly includes: Radiation chamber, convection chamber, ventilation system, recovery of waste heat, Radiation chamber and so on。

1、Brief introduction of Tempered multi well heating furnace

Tempered multi well heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is developed and improved by One-combustion energy saving。

Tempered multi well heating furnace

2、Tempered multi well heating furnace use

The purpose of Tempered multi well heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Tempered multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Tempered multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Tempered multi well heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Tempered multi well heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Tempered multi well heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Tempered multi well heating furnace

3、Introduction of Tempered multi well heating furnace characteristics

Tempered multi well heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Tempered multi well heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Tempered multi well heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Tempered multi well heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Efficient heating

The Tempered multi well heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Tempered multi well heating furnace

4、Tempered multi well heating furnace structure

The Tempered multi well heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Tempered multi well heating furnace

5、Working principle of Tempered multi well heating furnace

Tempered multi well heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is usually composed of Radiation chamber, convection chamber, ventilation system, furnace chamber and ventilation system，Tempered multi well heating furnaceThe overall structural design is simple and novel.，multifunctional, with functions such as normalizing, Forging heating, Casting heating, quench and anneal，widely used in war industry, building materials, petroleum, light industry, metallurgy and other fields，support customization。

Tempered multi well heating furnace

6、company introduction

Shandong yiran energy-saving environment protection co., ltd, located in Shandong(Province), is a large Tempered multi well heating furnace manufacturer. The Tempered multi well heating furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Tempered multi well heating furnaceSimple structure and reliable operation.，Structure consists of ventilation system, combustor, furnace chamber, convection chamber, ventilation system and so on，Commonly used inImprove production efficiency,Metal forging heating,Metal tempering,Energy conservation and environmental protection,Metal melting and casting and so on。