What is a Split type well tube furnace? Introduction to the principle of forging furnace structure

Split type well tube furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

1、Brief introduction of Split type well tube furnace

Split type well tube furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Easy to control,Strong adaptability,energy-efficient,Stable and reliable,Easy to control，is based on One-combustion energy saving is a Split type well tube furnace newly developed by One-combustion energy saving。

Split type well tube furnace

2、Introduction of Split type well tube furnace characteristics

Split type well tube furnace has the following characteristics

1. Easy to maintain

The structural design of the Split type well tube furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Split type well tube furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Split type well tube furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Split type well tube furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Split type well tube furnace

3、Split type well tube furnace structure composition

The Split type well tube furnace has the following structure

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Split type well tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Split type well tube furnace

4、Split type well tube furnace video live broadcast

You can buy Split type well tube furnace according to your needs and show you product videos.。

Split type well tube furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The overall structural design is relatively simple，the main structure includes ventilation system, recovery of waste heat, convection chamber, furnace chamber, combustor and so on。

5、Advantages of Split type well tube furnace principle

Split type well tube furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is usually composed of recovery of waste heat, convection chamber, combustor, Radiation chamber and ventilation system，This productSimple structure and advanced technology.，it is an ideal choice for customers to buy Split type well tube furnace。

Split type well tube furnace

6、Structural advantages of Split type well tube furnace

The Split type well tube furnace has the following structure

1. Radiation chamber

The heat load of the main place for Split type well tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Split type well tube furnace

Split type well tube furnacethe main structure includes furnace chamber, recovery of waste heat, Radiation chamber, Radiation chamber, ventilation system and so on，This Split type well tube furnaceThe overall structural design is simple and novel.，the product looks atmospheric.。