Introduction to Explosion proof well type annealing furnace, forging furnace advantages, characteristics and principles

Explosion proof well type annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The price is relatively low.。

1、Brief introduction of Explosion proof well type annealing furnace

Explosion proof well type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Explosion proof well type annealing furnace

2、Advantages of Explosion proof well type annealing furnace principle

Explosion proof well type annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the characteristics of Strong adaptability, Stable and reliable, Easy to control, Easy to maintain and energy-efficient，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

Explosion proof well type annealing furnace

3、Explosion proof well type annealing furnace HD real shot

One-combustion energy saving Explosion proof well type annealing furnacethe product looks atmospheric., the picture is taken.。

Explosion proof well type annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural characteristics of Explosion proof well type annealing furnace

The Explosion proof well type annealing furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Explosion proof well type annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Explosion proof well type annealing furnace

5、Explosion proof well type annealing furnace video detail

On-site aerial photography of Explosion proof well type annealing furnace。

Explosion proof well type annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks beautiful.。

Explosion proof well type annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the main features are energy saving and environmental protection, Easy to maintain, Easy to control, energy-efficient and energy saving and environmental protection。