Introduction to Bright Well Tube Furnace, how much is the price of the heating furnace?

Bright Well Tube FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，it has the functions of quench, temper, heat treatment, anneal and normalizing。The following is to introduce the Bright Well Tube Furnace:

1、Brief introduction of Bright Well Tube Furnace

Bright Well Tube FurnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It is mostly used in Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Metal tempering, Metal melting and casting, Metal tempering and so on，it has been widely used in petroleum, light industry, metallurgy, war industry, Machinery manufacturing and other industries，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.。

Bright Well Tube Furnace

2、Bright Well Tube Furnace field real shot

One-combustion energy saving Bright Well Tube Furnacethe product looks atmospheric., the following is a panoramic shot of the Bright Well Tube Furnace for your reference.。

Bright Well Tube Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Bright Well Tube Furnace characteristics

The Bright Well Tube Furnace features are as follows:

1. Strong adaptability

The Bright Well Tube Furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Efficient heating

The Bright Well Tube Furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Bright Well Tube Furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Bright Well Tube Furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Efficient heating

The Bright Well Tube Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Bright Well Tube Furnace

4、Bright Well Tube Furnace characteristics

The Bright Well Tube Furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Bright Well Tube Furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Bright Well Tube Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Bright Well Tube Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Bright Well Tube Furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Strong adaptability

The Bright Well Tube Furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Bright Well Tube Furnace

5、Bright Well Tube Furnace use

The purpose of Bright Well Tube Furnace is introduced as follows:

1. Metal forging heating

The Bright Well Tube Furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright Well Tube Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Bright Well Tube Furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Bright Well Tube Furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Bright Well Tube Furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Bright Well Tube Furnace

6、Introduction of advantages of Bright Well Tube Furnace

The advantages of Bright Well Tube Furnace are as follows:

1. Efficient combustion

The Bright Well Tube Furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Bright Well Tube Furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Intelligent control

The Bright Well Tube Furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Improve product quality

Because the Bright Well Tube Furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Bright Well Tube Furnace

Bright Well Tube FurnaceIt is a forging heating device using gas as fuel.，is a Bright Well Tube Furnace，usually used in automobile, heat treatment, material, surface treatment, petroleum and other fields。