Introduction to Denitrification of flue gas from roasting furnace, how much is the price of the SCR flue gas denitrification?

Denitrification of flue gas from roasting furnacethe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.。

1、Brief introduction of Denitrification of flue gas from roasting furnace

Denitrification of flue gas from roasting furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，Structure consists of Flue gas mixing and distribution system, control system, Catalyst supply system, Temperature control and monitoring system, Catalyst reactor and so on。

Denitrification of flue gas from roasting furnace

2、Denitrification of flue gas from roasting furnace characteristics

The Denitrification of flue gas from roasting furnace features are as follows:

1. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

2. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

3. High denitration efficiency

The denitration efficiency of Denitrification of flue gas from roasting furnace technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

4. Strong adaptability

Denitrification of flue gas from roasting furnace technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

5. Mature technology

After years of development and application, Denitrification of flue gas from roasting furnace technology is very mature and has a wide application prospect.

Denitrification of flue gas from roasting furnace

3、Denitrification of flue gas from roasting furnace structure

The Denitrification of flue gas from roasting furnace structure is introduced as follows:

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Reactor

It is the core component of Denitrification of flue gas from roasting furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

3. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

Denitrification of flue gas from roasting furnace

4、Denitrification of flue gas from roasting furnace real beat

The omni-directional high-definition real shot of the Denitrification of flue gas from roasting furnace is shown as follows to meet the purchase needs of our customers.。

Denitrification of flue gas from roasting furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Denitrification of flue gas from roasting furnace video detail

The following is the live video of Denitrification of flue gas from roasting furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from roasting furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification of flue gas from roasting furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of flue gas from roasting furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas from roasting furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas from roasting furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of flue gas from roasting furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of flue gas from roasting furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements. of Denitrification of flue gas from roasting furnace.。

Denitrification of flue gas from roasting furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is widely used in Gas power plant, coal-fired power station, building materials, iron and steel plant, metallurgy and other industries。

6、How much is the Denitrification of flue gas from roasting furnace?

The Denitrification of flue gas from roasting furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

3. sales mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. Cost input

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

5. Company size

Our company's expected profit value of Denitrification of flue gas from roasting furnace is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of Denitrification of flue gas from roasting furnace is relatively low.

Denitrification of flue gas from roasting furnace

Denitrification of flue gas from roasting furnaceat work,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，the product looks atmospheric.。