Introduction to Flue gas denitrification equipment inside the furnace, how much is the price of the SCR flue gas denitrification?

Flue gas denitrification equipment inside the furnacethat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，The overall structural design is relatively simple and compact.，generally, it is composed of Flue gas mixing and distribution system, Catalyst supply system, Temperature control and monitoring system, Catalyst reactor, control system and other major components，The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification equipment inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification equipment inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Flue gas denitrification equipment inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Flue gas denitrification equipment inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification equipment inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification equipment inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification equipment inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，it is an ideal choice for customers to buy Flue gas denitrification equipment inside the furnace。

1、Brief introduction of Flue gas denitrification equipment inside the furnace

Flue gas denitrification equipment inside the furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，It can be used for Flue gas denitrification, Improve product quality, Meet the requirements of environmental protection, Improve product quality, environmental protection, Flue gas denitrification and so on，it is widely used in metallurgy, coal-fired power station, Gas power plant, cement plant, coal-fired power station and other industries，it has the characteristics of energy saving and environmental protection, Strong adaptability, High denitration efficiency, Stable operation and Mature and stable technology，can be customized according to user's needs.。

Flue gas denitrification equipment inside the furnace

2、Flue gas denitrification equipment inside the furnace customer scene picture

One-combustion energy saving Flue gas denitrification equipment inside the furnace came in many pictures, which made everyone feast their eyes.。

Flue gas denitrification equipment inside the furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Flue gas denitrification equipment inside the furnace HD real shot

The following is the live video of Flue gas denitrification equipment inside the furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Flue gas denitrification equipment inside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Flue gas denitrification equipment inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification equipment inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency. of One-combustion energy savingFlue gas denitrification equipment inside the furnace.。

Flue gas denitrification equipment inside the furnace

As you can see from the live video.，One-combustion energy saving The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of Catalyst reactor, Catalyst supply system, control system, Flue gas mixing and distribution system and Temperature control and monitoring system。

4、Flue gas denitrification equipment inside the furnace application

Flue gas denitrification equipment inside the furnaceIt is a product series that integrates Promote sustainable development, environmental protection, Meet the requirements of environmental protection, Improve product quality and Promote sustainable development，Strong adaptability,Environmental protection and pollution-free,Good selectivity,energy saving and environmental protection,Less secondary pollution，is a kind of Flue gas denitrification equipment inside the furnace manufactured by One-combustion energy saving。

Flue gas denitrification equipment inside the furnace

5、Structural characteristics of Flue gas denitrification equipment inside the furnace

The Flue gas denitrification equipment inside the furnace structure is introduced as follows:

1. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

2. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

3. Reactor

It is the core component of Flue gas denitrification equipment inside the furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. control system

The whole Flue gas denitrification equipment inside the furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

Flue gas denitrification equipment inside the furnace

6、Brief introduction of Flue gas denitrification equipment inside the furnace

Flue gas denitrification equipment inside the furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，at runtime,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。

Flue gas denitrification equipment inside the furnace

Flue gas denitrification equipment inside the furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，features include Environment friendly, Mature technology, Efficient denitration, Stable operation and Promote sustainable development。