Introduction to Denitrification of flue gas outside the furnace and SCR denitration advantages and features

Denitrification of flue gas outside the furnacethe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas outside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of flue gas outside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of flue gas outside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of flue gas outside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas outside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas outside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas outside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，Cheap and high quality。The following is to introduce the Denitrification of flue gas outside the furnace:

1、Brief introduction of Denitrification of flue gas outside the furnace

Denitrification of flue gas outside the furnacedelective catalytic reduction technology is an efficient flue gas denitrification technology.，it mainly includes Catalyst supply system, Flue gas mixing and distribution system, control system, Temperature control and monitoring system and Catalyst reactor，Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.。

Denitrification of flue gas outside the furnace

2、Introduction of Denitrification of flue gas outside the furnace characteristics

The Denitrification of flue gas outside the furnace features are as follows:

1. Strong adaptability

Denitrification of flue gas outside the furnace technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

2. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

3. Environmental protection

The final products of Denitrification of flue gas outside the furnace technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. Mature technology

After years of development and application, Denitrification of flue gas outside the furnace technology is very mature and has a wide application prospect.

Denitrification of flue gas outside the furnace

3、Denitrification of flue gas outside the furnace work site real shot

One-combustion energy saving Denitrification of flue gas outside the furnace manufacturers, a variety of series of Denitrification of flue gas outside the furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Denitrification of flue gas outside the furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Advantages of Denitrification of flue gas outside the furnace principle

Denitrification of flue gas outside the furnacethe principle is simple.Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，be loved by our customers.。

Denitrification of flue gas outside the furnace

5、How much is the Denitrification of flue gas outside the furnace?

The Denitrification of flue gas outside the furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. company strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Denitrification of flue gas outside the furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Denitrification of flue gas outside the furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

3. regional difference

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. manufacturing cost

When the Denitrification of flue gas outside the furnace is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

5. market demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Denitrification of flue gas outside the furnace will also conform to this market law.

Denitrification of flue gas outside the furnace

6、One-combustion energy saving service

Denitrification of flue gas outside the furnace after-sales service is perfect, and a complete after-sales service system is established, which can solve customers' problems anytime and anywhere. In addition, our company promises that all customers who purchase this product can enjoy a full set of pre-sale, in-sale and after-sales services.。

One-combustion energy saving

Denitrification of flue gas outside the furnaceIt can be used for Flue gas denitrification, Improve product quality, Meet the requirements of environmental protection, Flue gas denitrification, Promote sustainable development, environmental protection and so on，the product looks beautiful.。