What is a Foundry flue gas denitrification? SCR flue gas denitrification specifications, models, and parameters

Foundry flue gas denitrificationthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。

1、Brief introduction of Foundry flue gas denitrification

Foundry flue gas denitrificationthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，at runtime,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，is a Foundry flue gas denitrification newly developed by One-combustion energy saving。

Foundry flue gas denitrification

2、Advantages of Foundry flue gas denitrification principle

Foundry flue gas denitrificationat the start of the operation,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，It has a wide range of uses, including environmental protection, Meet the requirements of environmental protection, Flue gas denitrification, Flue gas denitrification and environmental protection，features include Good selectivity, Efficient denitration, Economically feasible, Strong adaptability and Less secondary pollution。

Foundry flue gas denitrification

3、On-site real shot of Foundry flue gas denitrification

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Foundry flue gas denitrification

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Foundry flue gas denitrification characteristics

Foundry flue gas denitrification has the following characteristics

1. Strong adaptability

Foundry flue gas denitrification technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

2. Environmental protection

The final products of Foundry flue gas denitrification technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

3. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

4. High denitration efficiency

The denitration efficiency of Foundry flue gas denitrification technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

5. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

Foundry flue gas denitrification

5、Functional advantages of Foundry flue gas denitrification

Foundry flue gas denitrifications have the following advantages.

1. Intelligent control and convenience of operation

The Foundry flue gas denitrification has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Foundry flue gas denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. Wide applicability

Foundry flue gas denitrification technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Foundry flue gas denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Foundry flue gas denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Foundry flue gas denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. Mature and stable technology

Foundry flue gas denitrification technology has been developed and applied for many years, and the technology is mature and stable. The Foundry flue gas denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Foundry flue gas denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

5. Environmental friendliness

The by-products produced by Foundry flue gas denitrification technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Foundry flue gas denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

Foundry flue gas denitrification

6、How much is the Foundry flue gas denitrification?

The Foundry flue gas denitrification price is introduced as follows:

1. Cost input

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

2. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Foundry flue gas denitrification are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Foundry flue gas denitrification, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Less intermediate links

One-combustion energy saving Foundry flue gas denitrification manufacturer is a professional production center in Shandong(Province), the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Foundry flue gas denitrification price is also low.

5. Company size

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

Foundry flue gas denitrification

Foundry flue gas denitrificationthe principle is simple.Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，is an efficient, stable and environment-friendly flue gas denitrification technology.。