Brief introduction and advantages of Automatic lid opening forging furnace
Automatic lid opening forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.。
1、Brief introduction of Automatic lid opening forging furnace
Automatic lid opening forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，was developed and designed by One-combustion energy saving。
Automatic lid opening forging furnace
2、Introduction of Automatic lid opening forging furnace characteristics
Automatic lid opening forging furnace has the following characteristics
- Efficient heating
- Stable and reliable
- energy saving and environmental protection
- Stable and reliable
- Efficient heating
The Automatic lid opening forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.
The Automatic lid opening forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.
Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic lid opening forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.
The Automatic lid opening forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.
The Automatic lid opening forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.
Automatic lid opening forging furnace
3、Automatic lid opening forging furnace function
Automatic lid opening forging furnacemultifunctional, with functions such as Forging heating, normalizing, anneal, heat treatment and Forging heating，It is an efficient, energy-saving and environment-friendly metal heating device.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。
Automatic lid opening forging furnace
4、Structural advantages of Automatic lid opening forging furnace
The Automatic lid opening forging furnace has the following structure
- combustor
- Radiation chamber
- Waste heat recovery system
- Waste heat recovery system
- combustor
The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.
The heat load of the main place for Automatic lid opening forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.
Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.
Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.
The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.
Automatic lid opening forging furnace
5、Working principle of Automatic lid opening forging furnace
Automatic lid opening forging furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，can be customized according to user's needs.。
Automatic lid opening forging furnace
6、Introduction of Automatic lid opening forging furnace characteristics
Automatic lid opening forging furnace has the following characteristics
- Strong adaptability
- energy saving and environmental protection
- Easy to maintain
- Easy to control
- Stable and reliable
The Automatic lid opening forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.
As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic lid opening forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.
The structural design of the Automatic lid opening forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.
The combustion system and ventilation system of the Automatic lid opening forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.
The Automatic lid opening forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.
Automatic lid opening forging furnace
Automatic lid opening forging furnaceit has the functions of Casting heating, normalizing, temper, quench and hardening and tempering，is a popular Automatic lid opening forging furnace。
