What is a Natural gas storage chain heat treatment furnace?

Natural gas storage chain heat treatment furnaceIt is a forging heating device using gas as fuel.，it can be used in Household necessities, war industry, building materials, metallurgy, Machinery manufacturing and other industries，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，has been favored by more and more customers.。The following is to introduce the Natural gas storage chain heat treatment furnace:

1、Brief introduction of Natural gas storage chain heat treatment furnace

Natural gas storage chain heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Natural gas storage chain heat treatment furnace。

Natural gas storage chain heat treatment furnace

2、Natural gas storage chain heat treatment furnace performance advantage

Natural gas storage chain heat treatment furnaces have the following advantages.

1. Extend the service life of equipment

The Natural gas storage chain heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Natural gas storage chain heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Improve product quality

Because the Natural gas storage chain heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Natural gas storage chain heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Wide application range

The Natural gas storage chain heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Natural gas storage chain heat treatment furnace

3、Natural gas storage chain heat treatment furnace function

Natural gas storage chain heat treatment furnaceit has the functions of quench, normalizing, temper, anneal and heat treatment，Widely used inMetal tempering,Energy conservation and environmental protection,Metal forging heating,Metal heat treatment,Improve production efficiency and so on。

Natural gas storage chain heat treatment furnace

4、Natural gas storage chain heat treatment furnace application

Natural gas storage chain heat treatment furnaces have the following purposes.

1. Improve production efficiency

The Natural gas storage chain heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Natural gas storage chain heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Natural gas storage chain heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Natural gas storage chain heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Natural gas storage chain heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Natural gas storage chain heat treatment furnace

5、How much is the Natural gas storage chain heat treatment furnace?

The Natural gas storage chain heat treatment furnace price is introduced as follows:

1. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Natural gas storage chain heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Natural gas storage chain heat treatment furnace price can meet the purchasing needs of customers.

2. Model size

Because the specifications and models of products are different, their specifications and configurations are not the same. As we all know, the cost of products with high configuration will be higher, and vice versa, because there is a close relationship between product sales price and specifications and models.

3. Manufacturer scale

Our factory is a direct selling manufacturer of Natural gas storage chain heat treatment furnace, with independent production and processing facilities, few circulation links and low circulation cost.

4. market quotation

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Natural gas storage chain heat treatment furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

5. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving the address is located at:Shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

Natural gas storage chain heat treatment furnace

6、Brief introduction of One-combustion energy saving

Shandong yiran energy-saving environment protection co., ltd, located in Jinan, is a large Natural gas storage chain heat treatment furnace manufacturer. The Natural gas storage chain heat treatment furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Natural gas storage chain heat treatment furnaceUsually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。