Aluminum coil heating furnace detailed introduction

Aluminum coil heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It has the functions of Metal forging heating, Metal forging heating, Improve production efficiency, Metal melting and casting and Metal heat treatment，the main features are Stable and reliable, Easy to control, Easy to maintain, Strong adaptability and energy-efficient，is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Aluminum coil heating furnace

Aluminum coil heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Aluminum coil heating furnace

2、Aluminum coil heating furnace function

Aluminum coil heating furnacemultifunctional, with functions such as heat treatment, temper, Forging heating, normalizing and quench，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，the product looks beautiful.，be loved by our customers.。

Aluminum coil heating furnace

3、Aluminum coil heating furnace characteristics

The Aluminum coil heating furnace features are as follows:

1. Efficient heating

The Aluminum coil heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Strong adaptability

The Aluminum coil heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to maintain

The structural design of the Aluminum coil heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Aluminum coil heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Aluminum coil heating furnace

4、Aluminum coil heating furnace function

Aluminum coil heating furnaceit has the functions of Casting heating, anneal, hardening and tempering, heat treatment and Forging heating，energy saving and environmental protection,energy-efficient,Strong adaptability,Easy to maintain,energy saving and environmental protection，is a common Aluminum coil heating furnace，Widely used in Metal tempering, Energy conservation and environmental protection, Metal forging heating, Metal heat treatment and Energy conservation and environmental protection，It is an efficient, energy-saving and environment-friendly metal heating device.。

Aluminum coil heating furnace

5、Structural advantages of Aluminum coil heating furnace

The Aluminum coil heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Aluminum coil heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Aluminum coil heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Aluminum coil heating furnace

6、Aluminum coil heating furnace price advantage

The Aluminum coil heating furnace price is introduced as follows:

1. Cost input

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Aluminum coil heating furnace.

2. market quotation

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Aluminum coil heating furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

3. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Aluminum coil heating furnace price and service can meet the actual needs of customers.

5. market

With the increasingly fierce competition of Aluminum coil heating furnace, market factors have a certain influence on the price of Aluminum coil heating furnace. When the demand in the market increases and the supply remains unchanged, the price will rise. On the contrary, the price will fall. When there is an increase in supply and the demand remains unchanged, the price will rise, on the contrary, the price will fall.

Aluminum coil heating furnace

Aluminum coil heating furnaceis a popular Aluminum coil heating furnace，it is usually composed of convection chamber, ventilation system, combustor, ventilation system and furnace chamber，Aluminum coil heating furnaceSimple structure and reliable operation.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。