Introduction and functional advantages of Fully automatic feeding heating furnace

Fully automatic feeding heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it mainly includes furnace chamber, recovery of waste heat, combustor, Radiation chamber and combustor，the product looks atmospheric.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，favorable price。The following is to introduce the Fully automatic feeding heating furnace:

1、Brief introduction of Fully automatic feeding heating furnace

Fully automatic feeding heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，widely used inautomobile,metallurgy,machinery,Household necessities,aerospace and other industries，Cheap and high quality。

Fully automatic feeding heating furnace

2、Fully automatic feeding heating furnace picture

Take a look at the high-definition drawings of Fully automatic feeding heating furnace with excellent quality for our customers' reference.。

Fully automatic feeding heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Fully automatic feeding heating furnace characteristics

The Fully automatic feeding heating furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Efficient heating

The Fully automatic feeding heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Stable and reliable

The Fully automatic feeding heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Fully automatic feeding heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to maintain

The structural design of the Fully automatic feeding heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Fully automatic feeding heating furnace

4、Fully automatic feeding heating furnace advantage

The advantages of Fully automatic feeding heating furnace are as follows:

1. easy to operate

The operation interface of the Fully automatic feeding heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Uniform heating

The Fully automatic feeding heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Fully automatic feeding heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Efficient combustion

The Fully automatic feeding heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Multiple fuel options

Although the Fully automatic feeding heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Fully automatic feeding heating furnace

5、Fully automatic feeding heating furnace function

Fully automatic feeding heating furnacemultifunctional, with functions such as temper, Forging heating, quench, normalizing and anneal，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Fully automatic feeding heating furnace

6、Fully automatic feeding heating furnace price

The Fully automatic feeding heating furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Fully automatic feeding heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Fully automatic feeding heating furnace are different.

2. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving the address is located at:Shandong(Province) has convenient transportation, which provides a good convenience for the transportation of Fully automatic feeding heating furnace.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Manufacturer's strength

Although there are many manufacturers of products in Jinan, Shandong province, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. product costs

Cost is a direct and fundamental factor that affects the price of Fully automatic feeding heating furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Fully automatic feeding heating furnace price, low in cost and low in price.

Fully automatic feeding heating furnace

Fully automatic feeding heating furnaceStructure consists of furnace chamber, convection chamber, ventilation system, recovery of waste heat, Radiation chamber and so on，This productThe overall structural design is simple and novel.，features include Easy to maintain, energy saving and environmental protection, energy-efficient, Strong adaptability and energy saving and environmental protection，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。