Introduction to Hot rolled steel plate heating furnace, introduction to Forging furnace advantages and characteristics

Hot rolled steel plate heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Widely used inMetal forging heating,Metal melting and casting,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection and so on。

1、Brief introduction of Hot rolled steel plate heating furnace

Hot rolled steel plate heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Hot rolled steel plate heating furnace

2、Hot rolled steel plate heating furnace structure composition

The Hot rolled steel plate heating furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Hot rolled steel plate heating furnace

3、Hot rolled steel plate heating furnace characteristics

The Hot rolled steel plate heating furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Hot rolled steel plate heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Stable and reliable

The Hot rolled steel plate heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

The combustion system and ventilation system of the Hot rolled steel plate heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Hot rolled steel plate heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Hot rolled steel plate heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Hot rolled steel plate heating furnace

4、Hot rolled steel plate heating furnace use

The purpose of Hot rolled steel plate heating furnace is introduced as follows:

1. Metal forging heating

The Hot rolled steel plate heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Hot rolled steel plate heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Hot rolled steel plate heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Hot rolled steel plate heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Hot rolled steel plate heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Hot rolled steel plate heating furnace

5、Hot rolled steel plate heating furnace real beat

High-definition pictures of One-combustion energy saving Hot rolled steel plate heating furnace, showing different specifications and models.。

Hot rolled steel plate heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving company service

Perfect after-sales service is One-combustion energy saving's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as Hot rolled steel plate heating furnace price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

One-combustion energy saving

Hot rolled steel plate heating furnacefeatures include Easy to maintain, Easy to control, energy-efficient, Easy to maintain and energy-efficient，is a kind of high quality and low price Hot rolled steel plate heating furnace。