Introduction to High temperature heat treatment furnace, introduction to heating furnace advantages and characteristics

High temperature heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。The following is to introduce the High temperature heat treatment furnace:

1、Brief introduction of High temperature heat treatment furnace

High temperature heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

High temperature heat treatment furnace

2、High temperature heat treatment furnace use

The purpose of High temperature heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the High temperature heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, High temperature heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The High temperature heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The High temperature heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

High temperature heat treatment furnace

3、High temperature heat treatment furnace characteristics

The High temperature heat treatment furnace features are as follows:

1. Efficient heating

The High temperature heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Strong adaptability

The High temperature heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Stable and reliable

The High temperature heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the High temperature heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

High temperature heat treatment furnace

4、High temperature heat treatment furnace structure composition

The High temperature heat treatment furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for High temperature heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

High temperature heat treatment furnace

5、High temperature heat treatment furnace function

High temperature heat treatment furnaceit has the functions of Casting heating, temper, hardening and tempering, normalizing and Forging heating，the product looks atmospheric.，Simple structure and reliable operation.，the main structure includes Radiation chamber, ventilation system, combustor, ventilation system and ventilation system，is designed by One-combustion energy saving with advanced technology。

High temperature heat treatment furnace

High temperature heat treatment furnacethe product looks beautiful.，it is mainly composed of convection chamber, furnace chamber, convection chamber, ventilation system and recovery of waste heat，productSimple structure and advanced technology.，Commonly used inMetal melting and casting,Metal heat treatment,Energy conservation and environmental protection,Metal tempering,Metal melting and casting and so on。