What is a Rapid Annealing Heating Furnace? forging furnace specifications, models, and parameters

Rapid Annealing Heating FurnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Rapid Annealing Heating Furnace

Rapid Annealing Heating FurnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular Rapid Annealing Heating Furnace，super quality and competitive price。

Rapid Annealing Heating Furnace

2、Rapid Annealing Heating Furnace structure

The Rapid Annealing Heating Furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Rapid Annealing Heating Furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Rapid Annealing Heating Furnace

3、Rapid Annealing Heating Furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Rapid Annealing Heating Furnace production process and production site, and gain favorable comments and recognition from customers.。

Rapid Annealing Heating Furnace

As you can see from the live video.，One-combustion energy saving it has the functions of hardening and tempering, Forging heating, anneal, Casting heating and normalizing。

4、Rapid Annealing Heating Furnace performance advantage

The advantages of Rapid Annealing Heating Furnace are as follows:

1. Improve product quality

Because the Rapid Annealing Heating Furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. easy to operate

The operation interface of the Rapid Annealing Heating Furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Multiple fuel options

Although the Rapid Annealing Heating Furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Wide application range

The Rapid Annealing Heating Furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Rapid Annealing Heating Furnace can significantly reduce energy consumption, thus reducing operating costs.

Rapid Annealing Heating Furnace

5、Rapid Annealing Heating Furnace characteristics

The Rapid Annealing Heating Furnace features are as follows:

1. Strong adaptability

The Rapid Annealing Heating Furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Rapid Annealing Heating Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Rapid Annealing Heating Furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Stable and reliable

The Rapid Annealing Heating Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Rapid Annealing Heating Furnace

6、Rapid Annealing Heating Furnace price

The Rapid Annealing Heating Furnace price is introduced as follows:

1. market demand

When the market demand for Rapid Annealing Heating Furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Rapid Annealing Heating Furnace have more or less differences in price.

3. manufacturing cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Rapid Annealing Heating Furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Rapid Annealing Heating Furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Rapid Annealing Heating Furnace price can meet the purchasing needs of customers.

5. Overall configuration

The difference in Rapid Annealing Heating Furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

Rapid Annealing Heating Furnace

Rapid Annealing Heating Furnacefeatures include Strong adaptability, Easy to maintain, energy saving and environmental protection, Stable and reliable and Easy to maintain，It has a wide range of uses, and is often used inMetal forging heating,Metal melting and casting,Improve production efficiency,Metal forging heating,Energy conservation and environmental protection and so on。