Introduction to Dual station annealing and heating furnace, heating furnace specifications, model parameters

Dual station annealing and heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Dual station annealing and heating furnace

Dual station annealing and heating furnaceIt is a forging heating device using gas as fuel.，usually used in light industry, war industry, heat treatment, chemical industry, electron and other fields。

Dual station annealing and heating furnace

2、Dual station annealing and heating furnace use

The purpose of Dual station annealing and heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Dual station annealing and heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Dual station annealing and heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Dual station annealing and heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Dual station annealing and heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Dual station annealing and heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Dual station annealing and heating furnace

3、Dual station annealing and heating furnace advantage

The advantages of Dual station annealing and heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Dual station annealing and heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. easy to operate

The operation interface of the Dual station annealing and heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Extend the service life of equipment

The Dual station annealing and heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Uniform heating

The Dual station annealing and heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Efficient combustion

The Dual station annealing and heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Dual station annealing and heating furnace

4、Introduction of Dual station annealing and heating furnace characteristics

Dual station annealing and heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Dual station annealing and heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Dual station annealing and heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Dual station annealing and heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Dual station annealing and heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Dual station annealing and heating furnace

5、Dual station annealing and heating furnace function

Dual station annealing and heating furnacemultifunctional, with functions such as quench, hardening and tempering, temper, normalizing and anneal，the main structure includes furnace chamber, Radiation chamber, ventilation system, convection chamber, recovery of waste heat and so on，the product looks beautiful.，is a kind of high quality and low price Dual station annealing and heating furnace，is designed by One-combustion energy saving with advanced technology。

Dual station annealing and heating furnace

6、Brief introduction of Dual station annealing and heating furnace

Dual station annealing and heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It has the functions of Metal tempering, Energy conservation and environmental protection, Improve production efficiency, Metal forging heating and Improve production efficiency，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The overall structural design is relatively simple，it is usually composed of combustor, furnace chamber, ventilation system, combustor and furnace chamber，be loved by our customers.。

Dual station annealing and heating furnace

Dual station annealing and heating furnaceit is widely used in metallurgy, aerospace, light industry, material, heat treatment and other industries，the product looks atmospheric.。