What is a Anchor chain stainless steel annealing furnace? Introduction to the principle of forging furnace structure

Anchor chain stainless steel annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as temper, normalizing, hardening and tempering, Forging heating and heat treatment，Cheap and high quality。The following is to introduce the Anchor chain stainless steel annealing furnace:

1、Brief introduction of Anchor chain stainless steel annealing furnace

Anchor chain stainless steel annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.，is a common Anchor chain stainless steel annealing furnace，is carefully developed by One-combustion energy saving combined with advanced technology。

Anchor chain stainless steel annealing furnace

2、Anchor chain stainless steel annealing furnace structure

The Anchor chain stainless steel annealing furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Anchor chain stainless steel annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Anchor chain stainless steel annealing furnace

3、Anchor chain stainless steel annealing furnace use

Anchor chain stainless steel annealing furnaces have the following purposes.

1. Improve production efficiency

The Anchor chain stainless steel annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Anchor chain stainless steel annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Anchor chain stainless steel annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Anchor chain stainless steel annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Anchor chain stainless steel annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Anchor chain stainless steel annealing furnace

4、Anchor chain stainless steel annealing furnace display

The following picture is a panoramic shot of One-combustion energy saving Anchor chain stainless steel annealing furnace,the product looks atmospheric., which is trustworthy.。

Anchor chain stainless steel annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Anchor chain stainless steel annealing furnace performance advantage

Anchor chain stainless steel annealing furnaces have the following advantages.

1. Extend the service life of equipment

The Anchor chain stainless steel annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Improve product quality

Because the Anchor chain stainless steel annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Wide application range

The Anchor chain stainless steel annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Efficient combustion

The Anchor chain stainless steel annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Anchor chain stainless steel annealing furnace

6、company introduction

Shandong yiran energy-saving environment protection co., ltd, located in Jinan, is a large Anchor chain stainless steel annealing furnace manufacturer. The Anchor chain stainless steel annealing furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Anchor chain stainless steel annealing furnaceit is mainly composed of Radiation chamber, combustor, furnace chamber, convection chamber and ventilation system，productThe structural design is simple, novel and special.，widely used inpharmacy,aerospace,material,heat treatment,automobile and other industries，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。